Everything You Need To Know About Elite Hail Systems, Englewood

After a lengthy period of use, a car’s colour may fade and it may be required to repaint it. However, you do not need to take your automobile to the garage to repaint it because you may do so at home. I strongly suggest you to visit Elite Hail Systems, Englewood to learn more about this. A few basic processes must be followed when painting an automobile, as well as a large range of materials. The steps are as follows:

Choosing a suitable workplace: You’ll need a location with sufficient ventilation, electricity, good lighting, low dust, and enough space to park the car. In such settings, water heaters and furnaces are often avoided.

 

Assemble all of the necessary supplies for the project: Paint sprayer, Power sanders, Sanding pads, Air compressor, Masking tape, Paper, Primer, Paint, Thinner, Dust masks, respirator, eye protection, Body fillers, and Hand sand paper are among the tools required for the job.

Paint the car: Before you begin painting, you must first repair any dents in order for the painted surface to seem even. You can do this by going to a garage that offers dent removal services. To paint an automobile, you must first remove any rust from the surface so that the rust does not show up when the operation is completed.

Remove any body panel mouldings that can be replaced later, such as plastic trim or chrome. Using paper and masking tape, cover the parts of the car that will not be painted. Glasses, door knobs, window trim, grills, and mirrors are all covered.

Then you must remove the old paint so that the bare metal can be seen. You should carefully clean the entire body surface. Denatured alcohol or mineral spirits can be used for this. Make sure there are no oils on the car’s surface. Apply a primer to the surface after that. After priming your car, allow it to dry for a while before applying the paint of your choosing.

Contact Info

Elite Hail Systems
1281 W Dartmouth Ave, Englewood, CO 80110
Phone no: (303) 284-8651